Free Pattern - Christmas Wreath Ornament

Using worsted weight yarn - my ornament measures approx. 3" across.

Use scrap yarns of any size, with knitting needles sized appropriately for the yarn you are using.

Wreath strands (make 3)
Cast on 3 stitches and knit an I-cord (see this video if you haven't knit I-cord before)
Knit for 8" and cut the yarn through and run through the live stitches.

For at least one of the three, leave a longer cast on tail and bind off length to use to make the hanger.

Take three 'ends' and tie a knot with all three lengths of yarn.
Then braid the strands to each other.
Tie the opposite three ends together.

Tie the beginning ends to the opposite ends to form the wreath shape.
Trim the 'four' (two on each end) shorter ends.
The remaining 'two' ends (one on each end) that is longer can be knotted to form a hanging loop.

Bow (make 1)
Cast on 3 stitches and knit an I-cord
Knit for 8" and cut the yarn through and run through the live stitches

Weave in both ends.

Cross the ends of the I-cord - sort of like this:

Then using spare red yarn, wrap the center of the loop over the top of the cross so that it looks a little like a bow... then seam your bow to the top of the wreath covering up the knots formed with the ends of the green yarns.

September, only one week left

I've been a bit down and out.

There have been health issues.

I even went a whole month with only about ten minutes in total of knitting time (almost unheard of in my life).

But, I'm starting to get back on my feet.

In the meantime, my newest grandson has joined my family (there will be more baby pics with knitting).

And I'm going to be moving soon.

And classes are starting soon.

And I'm back to work in the office and everything (instead of just working from my bed in my pj's).

I'm keeping my knitting low-scale this term in HPKCHC to accommodate my life 'events'.

Mostly a couple of baby things, and lots of hats... and a medium-sized Order Mission which is my only big project right now.

Baby things - two burp rags (one double-knit, one knit in two pieces and seamed):

These were made after I noticed that the favorite knits my kids were using with the baby were the washcloths... and they had made an appearance because they kept running out of burp cloths. I was curious if a double-knit or double-layer would be useful. Since these have since been spotted in various locations after use - I'm thinking that they probably are being used pretty often.

I do think though - that I'll probably pick up a pack of cloth diapers for them for the purpose of more burp cloths.

And then there have been hats... lots of hats.... these are basically adult hats - some have been inspired by the golden pear pattern. EXCELLENT use of scraps... and I'm hoping to be down a 1000 yards or so for hats this month and again next month - maybe my stash pile won't be quite so overwhelming after I move (doubtful... but a girl can dream).

Charity hats the lot of them... though I may have to see shortly if there isn't a hat for Mr A (elder grandson) that might be on my to-do list.

And then, I almost forgot the socks I whipped up for little a (my youngest son). He's outgrown all his hand knit socks and all but the most recent couple of hoodies.... which means that he would really like more hand knits. His feet are as wide as mine, and almost as long. Since he loves the thick slipper socks as well as anything (and worsted weight is so much fast to knit anyway) - I whipped out a pair of slipper socks last week.

These were made using left over Hobby Lobby I Love This Yarn in camouflage ombre print. I used the pattern from You're Putting Me On. I don't care much for the heel. He likes them a lot - so they must be more comfortable than I expected... but I'll probably go back to other toe-up heel patterns.


Since I needed  a short break from stockinette - I spent about an hour or two to make a wildlife nesting bed to donate to Blank Park Zoo (might send it off after making a couple more)... it took 3 strands of worsted yarn - super fast, super easy and I think it was just the break I needed.

I'm working on hats # 6 - 10 for my OWL - which will have a total of 32 hats before I'm done.

And I've cast on my Color Affection shawl - in cream and two shades of blue with Cobasi yarn. I'm hoping to have enough on the needles to show you in a week or so.

Been a bit busy/ill/etc

But figured it might be ok to pop in and share baby in knitting pics.

My newest grandson has arrived...

picture from Anna Douglas Photography

Isn't he gorgeous?

Blanket & hat is knit in Cascade Cherub DK, color Boy Blue. The blanket is the pattern Twinkle Twinkle Baby blanket. It was a super fast knit for DK and was easy to memorize the pattern. I created the hat by using the same pattern, but stopping the increases when I had the right number of stitches, adding a couple of increases to get to evenly divisible by 6. Then I was able to repeat the star pattern by simply staggering the stars. It came out a tiny bit big (room to grow into, huh?) and he's shown wearing it with the brim rolled up.

sigh... another neglected knitting blog - this time my own

So, ignoring the blog works (for a while).

Scheduliing updates x times a month at different points works semi-well... but feels 'boring' and it feels like it's forced instead of natural.

Non-scheduled as I'm inspired posting worked well for about a month... and then... yeah. Silence.

I'm trying to decide if I want to keep the blog going or merge it into my more personal blog or what I want to do.... might take me a while to figure it out.

---

In the meantime... I made a diaper cake for my future grandson. I technically already have a grandson, but he was four when I met him (step-grandson, made me an instant grandma)... and so this is the first grandchild I get to throw a baby shower for.

And being a KNITTER (yes, all caps)... it can't just be any old pile of diapers, oh no... Every item on this diaper cake (well not counting the tissue paper, the ribbon and netting... not counting the baby bottle, baby bottle brush (hidden inside for stability) and not counting the pacifiers... but EVERYTHING else including the lion wearing the sweater on top - is hand knit). And, my daughter-in-law chose a Safari theme and I was off and running!

Baby hat - Bernat Baby Jaquards yarn, colorway Blue Grass -  knit in a smiple ribbed then stockinette baby hat.
Baby Sweater - Same yarn & color way - Child's V-neck placket sweater (Rav) made in 18 1/2 " size
Baby socks - Same yarn & color way - Big Boy pattern from an American School of Needlework pamphlet I found MANY years ago
Lion - Used Bernat Pipsqueek in Brown & Cream for the body, and dark brown fun fur for the tale and mane - Lester the Lion (Rav); pattern modified to knit in the round all but for the head... which I didn't realize COULD have been knit in the round because I was so confused when I was knitting it as to what was going on. TOTALLY love the bernat pipsqueek yarn for plushies! I will DEFINITELY be making more with it in the future... fun fur? I could live without - so it probably won't be another lion.
Washcloths - about ten in total... made with various cottons and either mitered garter squares, granny's old fashioned washcloths, or simple garter squares.
You can only see one - but there were two pacifier clips - simple I-cords with a pacifier on one end and an alligator clip on the other.
Zebra, Elephant, Monkey, Lion, Giraffe - made with various scraps of worsted weight acrylic from the Safari (Rav) Mobile pattern (mobile itself was also gifted and each of the critters has a ribbon in his back to hang them from the mobile - has alligator clips as well... or to be played with off-mobile)
Baby rattle - left over Hobby Lobby I Love this Yarn - Baby ball rattle (Rav)
Rings - various left over cottons - used rubber tubing cut to around 4-5" long, and stitched a 4-stitch I-cord around each... interlinked them, then seamed them into ring shape. Figured they could be put in water, then the freezer and make good teething rings.
Yoda baby bottle cozy - used leftover scraps of worsted weight yarn - Yoda baby bottle cozy pattern (Rav) - Yes, I know ... Yoda doesn't fit the safari theme... but I thought that he was too cute for words and my son (the daddy) LOVEs all things geeky, just like me... so it made it's way into the cake.
And lastly there were about eight or nine baby bibs of various sizes - One big cone of Peaches & Creme cotton in white along with scraps and a ton of different animal, vegetable and star trek charts... and the pattern The perfect baby bib (rav) and we've got bibs.

---

I've got a few other projects to share... maybe in a few years I'll remember to do so.

An itty bitty pile of itty bitty FO's

First off, the teeniest, tinyest little canary.

It's about two inches... sooo tiny. I made it with the Bluebird knitting pattern, made of course, with yellow yarn instead. This yarn is the leftovers from the incomplete Pikachu from last fall that I ran out of matching yarn on ... I've been using it up a bit here and there on various projects, frogging it as I work on the next item.  Hobby Lobby in the fluorescent yellow that I can't find in their stores nor website any longer. It's a heavy worsted, but I used tiny needles and it stayed nice and tiny. It probably took about 45 minutes to make from start to finish. I used crinkly plastic around the stuffing so that it makes a satisfying noise when grabbed... and I left a slight opening at the very bottom and have been periodically sticking a little catnip in... the cat is intrigued, but doesn't want me to see her playing with it (she's still working on haughty disdain).

Very fun to knit, and turned out really REALLY cute.

HPKCHC Note: This was a great turn-in for CoMC being 'yellow' which was one of the recommended colors for the class prompt. I also did it in honor of my pride, the canary creams as someone had suggested that we could make matching canaries to show pride unity.

And then I also whipped out a cute little ball rattle with the same leftovers...

 
This was made with a free online pattern - Baby Ball Rattle. To try to keep it 'noisy' and washing machine safe... I wrapped a couple of small jingle bells in a plastic pouch which was wrapped with fiberfill... and I'm hoping that means it can be filthy, yet tossed in the washer and dryer at will. Time will tell, I guess.

Again, a super quick project. Though the rapid increases and rapid decreases were a bit irritating and it wasn't my favorite project. However, not having any seams? That was a very good thing!

HPKCHC Note:  This was turned in for Divination... one of the prompts was to make something inspired by change. My brand new grandbaby who I don't expect to meet until this summer? Well, that seems like a big change that needed to be honored.

And lastly - a super cute Baby sweater (which ended up just HAVING TO HAVE a hat as well), because ... OMG the cute.

The photo is more in focus than you can tell from this shot... the green/white variegated and the white with shots of pale, colors is pretty light... and threw the camera for a little bit of a loop. The pattern is from Last Minute Knitted Gifts using discontinued yarn from Bernat yarns, specifically their Jacquard Jr's line. It's a sport weight yarn that does self-patterning with sections of variegated and stretches of stripes (as you can see by the sweater).  They do still carry the Baby Jacquard line which is more pastel yet... and tends to be true baby colors. But, I fell in love with the Junior line as it has a less baby-true palette and more bright colors.  I had purchased enough to make a small child sweater... And this sweater and hat didn't even use a full skein... so I am still trying to figure out what the next project this yarn is destined to become.

I made a slight mistake in placing the placket ... but it's a newborn sweater and honestly? with the baby due in August, it's unlikely to end up getting worn much, if at all. I figure though that cold air conditioning and/or a cool evening means that this way they have a sweater for the baby. If he/she never gets to wear it, well, then I can stress less about the mistake anyway.  It's great being able to pour a little love into a simple, cute project and it felt like this sweater practically knit itself. About the only things I would change (besides putting the placket in the right spot) is to use a more stretchy cast-on. I used the long-tail cast-on and the waist band and wrist cuffs are still a bit tight.

HPKCHC Note: Muggle Studies asked us to make items of clothing that Professor Quirrel might have worn during the times when he would have been a Muggle Studies professor. Well, wizards generally have a quite odd sense of clothing styles... and I did think about posing with the sweater on my head mock-turban style and the hat on my hands... but then I ended up stating that I simply practiced my reducto charm to shrink the items so that they would fit the new grand baby. No response yet from the professors, but I really don't expect one... they usually love little twists like that to help sell the project.

Knitting in the works

I've started working on Lempster... a new pattern on Knitty by Norah Gaughan. I'm using Knit Picks Shine Worsted in Macaw - which is a BRILLIANT, BRIGHT jewel-toned green. This yarn is super soft and is the same yarn I used for my Velvet Morning Cardigan (also, I believe, a Knitty Pattern) ... which I am wearing today in the sub-zero freezing temperatures.

While she seems to be a brilliant pattern designer... her take on top-down construction is new-to-her and a bit unusual... and ... challenging. It's turning out ok... and now that I'm at the upper shoulders and in some repeat rows, I'm loving it. It's still challenging now, but it's no longer scratch my head and frog it three times - hard.  After the set up, it's been pretty smooth sailing and I am loving watching the complex cables start to really show off in the yarn.

I've got one other heavily cabled sweater that I've made for myself, - only that one gets a little too warm. With this one having the nice wide neckline and being made in cotton/tencel blend, I'm hoping it will make a great warm, but not too warm sweater for me. The yarn is a joy to knit with and I really do need to plan on buying more for sweaters and/or other tops for myself in the future.

HPKCHC Note: This is part 1 of my Herbology OWL, option 1 (heavy cables). I expect to use only about 1100 yards or less on it... so there are some heavily cabled charity hats in my future once I'm sure how much yarn I need to get to the 1200 yard minimum. Had a rough start... but the yarn is flying off the skeins now... and I'm LOVING it.

I'm also working on learning how to knook. I did a washcloth last month and learned how to avoid twisted stitches on my purl rows... so this month, I'm branching out further doing a Sampler scarf.  The pattern is great... and basically, you are alternating each section of knook vs crochet stitches. I'm having a hard time sticking to the pattern as-written... but the ghist is in my head now, and I'm off and running. I've only got about two more stitch patterns to go to get to the half-way point... which then has you repeat the stitch sections again in reverse order (so you end with the same pattern you start with). But, I'm kind of thinking that I might do some of the sections I had done differently than written  the way they were written... and the ones where I followed the directions, I might swap those out for something new. The possibilities are pretty endless as long as you aren't doing any SSK's (which I suppose, I could figure out an alternative to).

I picked another Knit Picks yarn for this project... only it was their Diadem DK Special Reserve - which was a special order, no longer available product. It's actually quite 'unspun' as far as yarn goes. But the combination of alpaca and silk is divine to say the least... and the sheen? Is stunning. Add to it the bright gold color? And it's no wonder I had to have it!  The camera I'm using is not doing my colors justice. but, hopefully the FO pictures will be magnificent.

Knit picks does have fingering yarn with the same base - Diadum fingering; and if I worked with lighter weight yarns more often, this would be a big 'luxe' prize that I would purchase. As it is, DK is thin enough. Though the yarn does have subtle variation in thickness. At times, it's worsted weight easily enough. Great for something like a heavily textured scarf... not so great if one were working on intricate colorwork socks.

This particular project is 'ok'. I don't hate working on it... after all, who doesn't love alpaca and silk running through their fingers, especially in an almost-liquid-gold like feel. But, I'm not in love with the knook. I don't suppose I thought I would be... but that it felt like a nice tool to have under my belt in case I wanted to expand my teaching opportunities. In my brief exposure, it's not something I would recommend to existing knitters. It's something that 'might' be ok for existing crocheters who have trouble learning to knit. Mostly I find crocheters do better if they learn to knit continental style and don't really need that 'hook' to do it. But, it's still probably going to be my go-to tool if I'm working with someone with physical impairment. If their hands shake, or they have other fine motor skills issues, it's an option. But to be honest, it still is a challenge even with the hook and the cord helping ... but it's an option when there might not be many other options open to them.

HPKCHC Note: This will be class #2 for the term... there are lots of options between classes and badges for working with a new tool... and since I'd been procrastinating on working with the knook so long, it seemed like it was time. I'm planning on turning this in for Arithmancy!

And lastly, a semi-secret project.... in some Bernat Jacquard Jr (also discontinued yarns) that I picked up some time ago waiting for the 'right' project and the 'right' recipient. No more clues available at this time other than the picture. Again, colors are deeply faded - but you get at least a glimpse of some of the fun I'm having as the 'picture' is being painted on the project.

Now, this project? This project is hard to put down. It's in sport weight yarn, which I don't normally love. But it's simple, mindless knitting. It's growing fast, and every time I turn around I think... oh, I can knit a couple of more rows, then I'll get to the green & white section... or then I'll have the blue section finished, etc. Very fun, very quick (I started this just the other night)... very easy... well, what's not to love? Add that it's a special project for a semi-secret person... well, all the better!

HPKCHC Note: I figure this will fly as a reducio'd muggle garment for the Muggle Studies class this month.

My 2014 first FO's

It hardly counts, but weaving in one last end on the first of the month is becoming a tradition that's hard to break!!!

Here (with a little better lighting) is my striped Mermaid T...

I'm not entirely thrilled with the bottom edge. I'm putting it through laundry and we'll see what it does. I might end up having to add a couple of rows of crochet to get some 'weight' on it so it's not so curly and odd... It's supposed to flair slightly, but this is an out and out curl, which is not my style. Love the upper half tremendously and it does fit well... so now if I can just get the hem to settle down.

And secondly, my first charity hat of the year... cast on and finsihed on January 1. No set goal in mind for number of charity hats completed, but my goal is to use up scraps of leftover bits and pieces of yarn. So stripes will be common!

It's bright and red and cheery. I got to use up one small ball of burgandy-ish red and most of the scrap ball of a variegated red... and half of the ball of white. What's too little to save for future hats will find it's way to my scrap braided rug project.